Manual to use Stripper chemicals

,

Polishing, Stripping or renewing floor are the important progress with the commercial, industrial construction and cleaning services company. Removed chemical and stain on the floor are very important step in cleaning, influence the cleaning, polishing, stripping effect.

In this article, we introduce how to choose good Polish and wax chemical and progress of stripping and polishing floor

1. High quality Stripping and Polishing Chemicals

Hoachatkorea.com are the distributor of high quality industrials cleaning chemicals imported from Korea. Our wide range product appy for all cleaning demand of customer.

Our product include environmental friendly ingredient, do not harm human and environment

In stripping and polshing progress, we have many product for any demand and cleaning step:

- Stripper chemicals
- Polishing chemicals
- Daily cleaning chemicals

For Stripper chemicals, we recommend using 2 products: 


Highly Concentrated Powerful wax Remover JU STRIP


Low toxicity and concentrated wax Remover PUSH OUT for best cleaning effect.


The product contain include 70-80% water combine with the surfactant, solvent , the amine compound and Alkaline bonus make the chemical dissolve progress faster.

2. Process of stripping and polishing floor
Step 1: Diluted with clean water before clean the floor. The rate depend on stain and the cleaning area, common at the rate 1:2 ~ 1:4.

Coverage: Approx. 1,155m2 per 18.75L

Step 2: Clean and dry floor

Step 3: Apply the chemicals onto the cleaning area and wait 5 minutes.

- Start applying the chemicals by running the mop parallel to and next to the skirting board. Form a "U” shape section of applied wax. 
- Coat the remaining floor area, inside the "U", using figure "8" stroke. Be sure to cover the entire floor. 

Step 4: Put the soft fabric under the cleaning machine or under the gear along the wall corner. Handle clean the area cleaning machine cannot reach

- Start applying the floor wax by running the mop parallel to and next to the skirting board. Form a "U” shape section of applied wax. 
- Coat the remaining floor area, inside the "U", using figure "8" stroke. Be sure to cover the entire floor. 

Step 5: Clean the floor with water.

Step 6: Dry the floor and other equiments. Repeat the step 1 to 5 about 2 or 3 times for best stripping and polishing effect

Note: Highly recommend to use with the neutralizer to dissolve completely chemical on the floor.

Contact +84 0904.643.943 for more detail information about products.
Website: Hoachatkorea.com